Bayonet 110mm DTH Drill Bit Russian Type For Mining / Water Well Drilling

Bayonet 110mm drill bit Russian type P-110 low air pressure KNSH

Adrill Bits

With Adriller you will get more meters drilled before first regrind, more meters drilled between regrinds,

And many more meters drilled at bit discard. This is long-lasting performance you can rely on.

Description:

Harder, stronger steel body grade

The steel body grade for the Powerbit range is chosen with utmost care to ensure the right

hardness, strength and abrasion resistance.

Improved heat treatment gives at least 10 % better fatigue strength.

And, the stronger steel holds the buttons better, reducing the risk for pop-outs.

Applications:

1. Than 9 Mm Above The Surface Of The Drill. If The Bit Is Unevenly Worn, It Is Likely That Due To Incorrect Grinding, The Bending Of The Drill Pipe Or Excessive Traction Can Also Cause Cracks In The Surface Of The Bit, Which Will Cause The Bulk Metal To Fall Off.

The Depth Of The Chip's Chip Flute Should Be Controlled By The Abrasiveness And High Penetration Rate Of The Bit Body. The Grooves Must Be Ground Frequently To Ensure That The Drilled Debris Is Well Removed

Feature Advantage:

For Blast Hole Drilling To Be Successful Several Specifications Have To Be Ensured, These Include The Depth And Spacing Of The Blast Holes, The Number Of Holes In The Designated Area And The Formation Of Rock And Soil. Drills Range In Size And Are Dependent On The Project Requirements. Correct Drill And Blast Selections Are Crucial In Ensuring The Project Is Completed Correctly And Within The Time Allocated.